Wood To Works Classic Log & Lumber End Sealer - 3.78 L

Wood To Works Classic is a best-in-class premium wax emulsion end sealer used for the prevention of end checks (drying splits) in both hardwood & softwood logs or lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented when applying. It was the 1st end grain sealer introduced to the log & lumber industry by U-C Coatings in 1980 and is still considered the best end grain protection you can get for logs & lumber. It is also widely used in the woodworking industry to protect, debarked logs, wood turning blanks, log "cookies" and live edge slabs.

Features

• Prevents up to 90% of end checks and drying splits on logs and freshly cut lumber
• Can be applied to all species of hardwood or softwood
• Helps prevent blue stain and sapstain caused by damaging fungi
• Water based, non-hazardous, no solvents, soap & water clean-up
• Available in clear or more than 35 colors
• Winterized formulas available
• Coverage: 100 sq. ft./gallon, depending on application method and wood species.
• Surface Preparation

• All areas to be coated should be clear of dirt and debris

Application

• Apply using a brush, roller or sprayer until it begins to drip slightly
• For optimal coverage, use a gas engine, electric, air operated or backpack sprayer
• If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
• Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
• Clean application equipment using hot soapy water
• Store above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage